GPS POI > GPS Forum > Garmin > Nuvi 770 multi maps

Rain · Guest

Hi

I just got my Garmin Nuvi 770 and at the same time i checked the maps and there were the 2008 ones.

So I got the 2009 updates, my question being, when i try to install the maps they keep overwriting each other?

So i cant run my 2009 North American map AND my 2009 EU map

Any ideas?

roadrider01 · Posted: 02/03/2009 01:38am Post subject: Nuvi 770 multi maps

You can check with Garmin on how to install them together but I suspect you may have to install one of them on an SD card.

martynghjones · Posted: 02/03/2009 12:51pm Post subject: Re: Nuvi 770 multi maps

The Nuvi uses a disk based file system and can support multiple maps on the hard drive and the SD card.

You can have various mapsets loaded on your nuvi...not just the basemap and detail map. These mapsets all reside in the x:/Garmin folder on both the nuvi drive and the SD Card drive. The nuvi 7x0 can access up to six different mapsets (*one* on the SD Card). The nuvi 7x5 can access up to nine different mapsets (*one* on the SD Card)

Example:

Mapset 1. City Navigator North America NT 2009 = nuvi drive main detail mapset (gmapprom.img)
Mapset 2. City Navigator Mexico NT 2008 = nuvi drive OEM detailed mapset (gmapoem.img)
Mapset 3. US Topo 2008 = nuvi drive supplemental detailed mapset (gmapsupp.img)
Mapset 4. City Navigator Europe NT 2009 = SD Card drive supplemental mapset (gmapsupp.img)
Mapset 5. nuvi drive Basemap (gmapbmap.img)

*Note: Before fiddling with mapsets, make a backup of them first, especially gmapprom.img as this is your main detailed mapset.

Here's a list of the nuvi 7x0 & 7x5's mapset names & their relationship with the nuvi
drive/SD Card:

Nuvi map naming convention
------------------------------------
1. gmapprom.img: (7x0/7x5) nuvi drive only, (primary mapset)

2. gmapprom1.img: (7x0/7x5) nuvi drive only (secondary mapset) example: North American / European units

3. gmapsupp.img: (7x0/7x5) nuvi drive (supplemental mapset)

4. gmapsupp.img: (7x0/7x5) nuvi SD Card drive (supplemental mapset)

5. gmapoem.img: (7x0/7x5) nuvi drive only (OEM mapset), user accessible, cannot be unselected from the unit via Tools/Settings/Map/Map Info

*Note, when using the following default system maps as user maps, you'll naturally lose their default map attributes.

6. gmapbmap.img: (7x0/7x5) nuvi drive only (default basemap), configurable as a supplemental map; rename desired mapset to gmapbmap.img, NOT selectable and does NOT show up under installed maps (Tools/Settings/Map/Map Info) but may be visible under Tools/Settings/System/About/Basemap

7. gmaptz.img: (7x5 only) nuvi drive only (default 7x5 Timezone map), configurable as a supplemental map; rename desired mapset to gmaptz.img

8. gmap3d.img: (7x5 only) nuvi drive only (default 7x5 3D Buildings map), configurable as a supplemental map; rename desired mapset to gmap3d.img

+9. gmap3d1.img (7x5 only) nuvi drive only (secondary 7x5 3D Buildings map), configurable as a supplemental map; rename desired mapset to gmap3d1.img

Nuvi internal (diagnostic utility) OS map naming
-----------------------------------------------------------
7x0/7x5

1. PROM1 = gmapprom.img
2. PROM2 = gmapprom1.img
3. Suppmap1 = gmapsupp.img (nuvi drive only)
4. Suppmap = gmapsupp.img (SD Card drive only)
5. Dir DB = gmapoem.img
6. Basemap = gmapbmap.img

7x5 only

7. TZMap = gmaptz.img
8. 3DMap 1 = gmap3d.img
+9. 3DMap 2 = gmap3d1.img

paulo.fedozzi · Posted: 01/24/2010 01:08pm Post subject: TY

Thank you. I have 2 maps and I wasn´t sure how to deal with both.

Guest

Interesting. The 885T I just received does not recognize the gmapprom1.img file name like my 765T does. Called Garmin and they said is should, but I will be darned if anything, locked or unlocked shows up under that moniker... However, the gmapoem.img name does still work and it does show up under Map Info and it is, selectable. Just goes to show things do change in the Garmin world. lol

MikieP